Filter
Top Products
set port negotiation 79
set port negotiation Disables or reenables autonegotiation on gigabit Ethernet or 10/100
Ethernet ports.
Syntax —
set port negotiation port-list {enable | disable}
port-list — List of physical ports. MSS disables or reenables
autonegotiation on all the specified ports.
enable — Enables autonegotiation on the specified ports.
disable — Disables autonegotiation on the specified ports.
Defaults — Autonegotiation is enabled on all Ethernet ports by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — WX1200 10/100 Ethernet ports support half-duplex and
full-duplex operation.
Examples — The following command disables autonegotiation on ports
3 and 5:
WX1200# set port negotiation 3,5 disable
The following command enables autonegotiation on port 2:
WX1200# set port negotiation 2 enable
set port poe Enables or disables Power over Ethernet (PoE) on ports connected to MAP
access points.
CAUTION: When you set the port type for MAP use, you can enable PoE
on the port. Use the WX switch’s PoE to power 3Com MAP access points
only. If you enable PoE on ports connected to other devices, damage can
result.
Syntax —
set port poe port-list enable | disable
port-list — List of physical ports. MSS disables or reenables PoE on
all the specified ports.
enable — Enables PoE on the specified ports.
disable — Disables PoE on the specified ports.