Filter
Top Products
set dot1x reauth 435
Examples — Type the following command to set the quiet period to
90 seconds:
WX4400# set dot1x quiet-period 90
success: dot1x quiet period set to 90.
See Also
clear dot1x quiet-period on page 424
set dot1x wep-rekey-period on page 439
set dot1x reauth Determines whether the WX switch allows the reauthentication of
supplicants (clients).
Syntax —
set dot1x reauth {enable | disable}
enable — Permits reauthentication.
disable — Denies reauthentication.
Defaults — Reauthentication is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to enable reauthentication of
supplicants (clients):
WX4400# set dot1x reauth enable
success: dot1x reauthentication enabled.
See Also
display dot1x on page 427
set dot1x reauth-max on page 436
set dot1x reauth-period on page 436