Filter
Top Products
display snmp configuration 129
CounterMeasureStopTraps YES
ClientDot1xFailureTraps YES
Community Access Community Name
---------------- --------------
read-only public
read-write private
Table 34 describes the fields in this display.
See Also
set ip snmp server on page 142
set port trap on page 82
set snmp community on page 150
set snmp trap on page 151
set snmp trap receiver on page 153
set system contact on page 51
set system location on page 54
set system name on page 55
Table 34 Output of display snmp configuration
Field Description
Snmp agent is State of the SNMP agent on the WX switch:
Enabled
Disabled
System Name String configured by the set system name command.
System location String configured by the set system location command.
System contact String configured by the set system contact command.
System description WX switch model.
Trap Receiver IP address of each trap receiver.
Trap Name SNMP traps supported by MSS.
Enabled State of each trap:
Yes
No
Community Access Type of access for an SNMP community.