Filter
Top Products
458 CHAPTER 17: RF DETECTION COMMANDS
See Also
display rfdetect ignore on page 461
set rfdetect ignore on page 467
display rfdetect
countermeasures
Displays the current status of countermeasures against rogues in the
Mobility Domain.
Syntax —
display rfdetect countermeasures
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — This command is valid only on the seed switch of the Mobility
Domain.
Examples — The following example displays countermeasures status for
the Mobility Domain managed by this seed switch:
WX1200# display rfdetect countermeasures
Total number of entries: 8
Rogue MAC Countermeasures WX-IPaddr Port/Radio
Radio Mac /Channel
----------------- ------------------ --------------- -------------
00:00:00:01:7a:80 00:0b:0e:00:0a:a3 10.8.121.101 5/2/60
00:0b:0e:08:1a:01 Not Started
00:0b:0e:01:00:00 Not Started
00:0b:0e:00:03:80 00:0b:0e:00:0a:6a 10.8.121.102 3/1/1
00:0b:0e:00:d1:00 00:0b:0e:00:0a:6a 10.8.121.102 3/1/11
00:0b:0e:00:7a:80 00:0b:0e:00:0a:6b 10.8.121.102 3/2/60
00:06:25:51:e9:ff Not Started
00:0b:0e:01:08:40 00:0b:0e:00:0a:6a 10.8.121.102 3/1/1
Table 86 describes the fields in this display.