Filter
Top Products
118 CHAPTER 6: IP SERVICES COMMANDS
See Also
set arp on page 133
set arp agingtime on page 134
display interface Shows the IP interfaces configured on the wireless LAN switch.
Syntax — display interface [vlan-id]
vlan-id — VLAN name or number.
Defaults — If you do not specify a VLAN ID, interfaces for all VLANs are
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays all the IP interfaces
configured on a WX switch:
Type Entry type:
DYNAMIC — Entry was learned from network traffic and
ages out if unused for longer than the ARP aging
timeout.
LOCAL — Entry for the WX switch’s MAC address. Each
VLAN has one local entry for the WX switch’s MAC
address.
PERMANENT — Entry does not age out and remains in
the configuration even following a reboot.
STATIC — Entry does not age out but is removed after a
reboot.
State Entry state:
RESOLVING — MSS sent an ARP request for the entry
and is waiting for the reply.
RESOLVED — Entry is resolved.
Table 26 Output for display arp (continued)
Field Description