Filter
Top Products
fver 519
fver Displays the version of a system image file installed in a specific location
on a WX switch.
Syntax —
fver {c: | d: | e: | f: | boot0: | boot1:}
[filename]
c: — Nonvolatile storage area containing boot partition 0 (primary).
d: — Nonvolatile storage area containing boot partition 1
(secondary).
e: — Primary partition of the flash card in the flash card slot.
f: — Secondary partition of the flash card in the flash card slot.
boot0: — Boot partition 0.
boot1: — Boot partition 1.
filename — System image filename.
Defaults — None.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Usage — To display the image filenames, use the dir command. This
command does not list the boot code versions. To display the boot code
versions, use the version command.
Examples — The following command displays the system image version
installed in boot partition 1:
boot> fver boot1
File boot1:default version is 3.0.1.
See Also
dir on page 516
version on page 524