Filter
Top Products
display roaming station 97
Table 21 describes the fields in the display.
See Also
display roaming vlan on page 98
Table 21 Output for display roaming station
Field Description
User Name Name of the user. This is the name used for authentication. The
name resides in a RADIUS server database or the local user
database on a wireless LAN switch.
Station IP Addr IP address of the user WX switch.
Old AP MAC MAC address of the access point from which the station is
roaming or attempting to roam.
Note: This field is applicable only for clients that reassociate with
this WX switch from another WX switch.
VLAN Name of the VLAN to which the RADIUS server or WX switch
local user database assigned the user.
State State of the session:
Setup — Station is attempting to roam to this WX switch.
This switch has asked the WX from which the station is
roaming for the station’s session information and is waiting
for a reply.
Up — MSS has established a tunnel between the WX switches
and the station has successfully roamed to this WX over the
tunnel.
Chck — This WX switch is in the process of accepting a
reassociation request from the roaming peer WX switch for a
station currently roaming to the peer switch.
TChck — This WX switch is in the process of accepting a
reassociation request from the roaming peer WX switch for a
station currently roaming to this switch.
WInd — This WX switch is waiting for network congestion to
clear before sending the roaming indication to the roaming
peer WX switch.
WResp — This WX switch is waiting for network congestion
to clear before sending the roaming response to the roaming
peer WX switch.