Filter
Top Products
display spantree portvlancost 329
display spantree
portvlancost
Shows the cost of a port on a path to the STP root bridge, for each of the
port’s VLANs.
Syntax —
display spantree portvlancost port-list
port-list — List of ports.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the STP port cost of port 1:
WX4400# display spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
clear spantree portcost on page 320
clear spantree portvlancost on page 321
display spantree on page 324
set spantree portcost on page 340
set spantree portvlancost on page 343
display spantree
statistics
Displays STP statistics for one or more WX network ports.
Syntax —
display spantree statistics
[port-list [vlan vlan-id]]
port-list — List of ports. If you do not specify any ports, MSS
displays STP statistics for all ports.
vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, MSS displays STP statistics for all VLANs.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.