Filter
Top Products
set service-profile tkip-mc-time 313
set service-profile
tkip-mc-time
Changes the length of time that MAP radios use countermeasures if two
message integrity code (MIC) failures occur within 60 seconds. When
countermeasures are in effect, MAP radios dissociate all TKIP and WPA
WEP clients and refuse all association and reassociation requests until the
countermeasures end.
Syntax —
set service-profile name tkip-mc-time wait-time
name — Service profile name.
wait-time — Number of milliseconds (ms) countermeasures remain
in effect. You can specify from 0 to 60,000.
Defaults — The default countermeasures wait time is 60,000 ms (60
seconds).
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Countermeasures apply only to TKIP and WEP clients. This
includes WPA WEP clients and non-WPA WEP clients. CCMP clients are
not affected.
The TKIP cipher suite must be enabled. The WPA IE also must be enabled.
Examples — The following command changes the countermeasures
wait time for service profile sp3 to 30,000 ms (30 seconds):
WX4400# set service-profile sp3 tkip-mc-time 30000
success: change accepted.
See Also
set service-profile cipher-tkip on page 305
set service-profile wpa-ie on page 318