Filter
Top Products
128 CHAPTER 6: IP SERVICES COMMANDS
display snmp
configuration
Shows SNMP settings on a wireless LAN switch.
Syntax —
display snmp configuration
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — To display SNMP settings on a WX switch, type the
following command:
WX1200# display snmp configuration
Snmp agent is enabled
System Name: WX1200
System location:
System contact:
Trap Name Enabled
---------------------------------- -------
LinkDownTraps YES
LinkUpTraps YES
AuthenTraps YES
DeviceFailTraps YES
DeviceOkayTraps YES
PoEFailTraps YES
MAPTimeoutTraps YES
MAPBootTraps YES
MobilityDomainJoinTraps YES
MobilityDomainTimeoutTraps YES
MichaelMICFailureTraps YES
RFDetectRogueAPTraps YES
RFDetectAdhocUserTraps YES
RFDetectRogueDisappearTraps YES
ClientAuthenticationFailureTraps YES
ClientAuthorizationFailureTraps YES
ClientAssociationFailureTraps YES
ClientAuthorizationSuccessTraps YES
ClientClearedTraps YES
ClientDeAssociationTraps YES
ClientRoamingTraps YES
AutoTuneRadioPowerChangeTraps YES
AutoTuneRadioChannelChangeTraps YES
CounterMeasureStartTraps YES