Filter
Top Products
452 CHAPTER 16: SESSION MANAGEMENT COMMANDS
Table 84 display sessions network session-id Output
Field Description
Global Id A unique session identifier within the Mobility Domain.
State Status of the session:
AUTH, ASSOC REQ — Client is being associated by the 802.1X
protocol.
AUTH AND ASSOC — Client is being associated by the 802.1X
protocol, and the user is being authenticated.
AUTHORIZING — User has been authenticated (for example,
by the 802.1X protocol and an AAA method), and is entering
AAA authorization.
AUTHORIZED — User has been authorized by an AAA method.
ACTIVE — User’s AAA attributes have been applied, and the
user is active on the network.
DEASSOCIATED — One of the following:
Wireless client has sent the WX switch a disassociate message.
User associated with one of the current WX switch’s MAP
access points has appeared at another WX switch in the
Mobility Domain.
ROAMING AWAY — The WX switch has been sent a request
to transfer the user, who is roaming, to another WX switch.
STATUS UPDATED — WX switch is receiving a final update
from an MAP access point about the user, who has roamed
away.
WEB_AUTHING — User is being authenticated by WebAAA.
WIRED AUTH’ING — User is being authenticated by the
802.1X protocol on a wired authentication port.
KILLING — User’s session is being cleared, because of 802.1X
authentication failure, entry of a clear command, or some other
event.
Port/Radio Number of the port and radio through which the user is accessing
this session.
MAC address MAC address of the session user.
User Name Name of the authenticated user of this session
IP Address IP address of the session user.
Vlan Name Name of the VLAN associated with the session.
Tag System-wide supported VLAN tag type.