Filter
Top Products
display {ap | dap} etherstats 243
See Also
display sessions network on page 446
display {ap | dap}
etherstats
Displays Ethernet statistics for a MAP’s Ethernet ports.
Syntax — display {ap | dap} etherstats [port-list | dap-num]
port-list — List of WX switch ports directly connected to the MAPs
for which to display counters.
dap-num — Number of a Distributed MAP for which to display
counters.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays Ethernet statistics for the
Ethernet ports on Distributed MAP 1:
WX4400# display dap etherstats 1
DAP: 1 ether: 1
=================================
RxUnicast: 75432 TxGoodFrames: 55210
RxMulticast: 18789 TxSingleColl: 32
RxBroadcast: 8 TxLateColl: 0
RxGoodFrames: 94229 TxMaxColl: 0
TxMultiPkt Number of multicast packets transmitted by the radio.
TxUniByte Number of unicast bytes transmitted by the radio.
TxMultiByte Number of multicast bytes transmitted by the radio.
RxPkt Number of packets received by the radio.
RxByte Number of bytes received by the radio.
UndcrptPkt Number of undecryptable packets received by the radio.
UndcrptByte Number of undecryptable bytes received by the radio.
PhyError Number of packets received by the radio that contained
Physical layer (PHY) errors.
Table 46 Output for display ap counters (continued)
Field Description