Filter
Top Products
set ip ssh idle-timeout 145
set ip ssh
idle-timeout
Changes the number of minutes an SSH session can remain idle.
Syntax —
set ip ssh idle-timeout minutes
minutes — Number of minutes an SSH session can remain idle. You
can set the idle timeout to a value from 0 (disabled) to 2,147,483,647
minutes.
Defaults — The default idle timeout is 30 minutes.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — If the idle timeout is disabled, MSS changes the default
absolute timeout from 0 (disabled) to 60 minutes to prevent an
abandoned session from remaining open indefinitely. 3Com recommends
using the idle timeout instead to close unused sessions.
Examples — The following command changes the idle timeout value to
20 minutes:
WX4400# set ip ssh idle-timeout 20
success: idle timeout set to 20 minutes
See Also
set ip ssh on page 143
set ip ssh absolute-timeout on page 144
set ip ssh server on page 145
set ip ssh server Disables or reenables the SSH server on a wireless LAN switch.
CAUTION: If you disable the SSH server, SSH access to the WX switch is
also disabled.
Syntax —
set ip ssh server {enable | disable}
enable — Enables the SSH server.
disable — Disables the SSH server.
Defaults — The SSH server is enabled by default.