Filter
Top Products
display {ap | dap} config 239
bias Bias of the WX connection to the MAP:
High
Low
name MAP access point name.
boot-download-
enable
State of the firmware upgrade option:
YES (automatic upgrades are enabled)
NO (automatic upgrades are disabled)
load balancing group Names of the MAP load-balancing groups to which the MAP
access point belongs. If the value is None, the access point
does not belong to any load balancing groups.
Note: This field is displayed only if the MAP is a member of a
group.
Radio Radio number. The information listed below this field applies
specifically to the radio.
type Radio type:
802.11a
802.11b
802.11g
mode Radio state:
Enabled
Disabled
channel Channel number.
antennatype External antenna model, if applicable.
tx pwr Transmit power, in dBm.
profile Radio profile that manages the radio. Until you assign the
radio to a radio profile, MSS assigns the radio to the default
radio profile.
auto-tune
max-power
Maximum power level the RF Auto-Tuning feature can set on
the radio.
The value default means RF Auto-Tuning can set the
power up to the maximum level allowed for the country
of operation.
A specific numeric value means you or another
administrator set the maximum value.
Table 45 Output for display ap config (continued)
Field Description