Filter
Top Products
set ip dns server 139
set ip dns server on page 139
set ip dns server Specifies a DNS server to use for resolving hostnames you enter in CLI
commands.
Syntax —
set ip dns server ip-addr {primary | secondary}
ip-addr — IP address of a DNS server, in dotted decimal or CIDR
notation.
primary — Makes the server the primary server, which MSS always
consults first for resolving DNS queries.
secondary — Makes the server a secondary server. MSS consults a
secondary server only if the primary server does not reply.
Defaults — None.
Access — Enabled.
Usage — You can configure a WX switch to use one primary DNS server
and up to five secondary DNS servers.
Examples — The following commands configure a WX switch to use a
primary DNS server and two secondary DNS servers:
WX1200# set ip dns server 10.10.10.50/24 primary
success: change accepted.
WX1200# set ip dns server 10.10.20.69/24 secondary
success: change accepted.
WX1200# set ip dns server 10.10.30.69/24 secondary
success: change accepted.
See Also
clear ip dns domain on page 110
clear ip dns server on page 111
display ip dns on page 120
set ip dns on page 137
set ip dns domain on page 138