Filter
Top Products
clear interface 109
clear interface Removes an IP interface.
Syntax — clear interface vlan-id ip
vlan-id — VLAN name or number
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — If the interface you want to remove is configured as the system
IP address, removing the address can interfere with system tasks that use
the system IP address, including the following:
Mobility domain operations
Topology reporting for dual-homed MAP access points
Default source IP address used in unsolicited communications such as
AAA accounting reports and SNMP traps
Examples — The following command removes the IP interface
configured on VLAN mauve:
WX1200# clear interface mauve ip
success: cleared ip on vlan mauve
See Also
set interface on page 135
set interface status on page 136
display interface on page 118
set snmp trap on page 151
set snmp trap receiver on page 153
clear snmp trap receiver on page 114
Ping ping on page 132
Telnet Client telnet on page 158
Traceroute traceroute on page 160
Table 25 IP Services Commands by Usage (continued)
Type Command