Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 1006 NDA-24297, Issue 1
R-22 Restriction from Outgoing Calls - CCIS
R-22 Restriction from Outgoing Calls - CCIS
General Description
This feature automatically restricts preselected stations from placing certain outgoing calls through CCIS without
Attendant assistance.
Operating Procedure
No manual operation is required. Restricted stations will receive reorder tone when trying to place a restricted call.
Service Conditions
1. This feature is programmed in system data from the MAINTENANCE ADMINISTRATION
TERMINAL (MAT) [M-18].
2. The Attendant can allow restricted stations to place outgoing calls via the ATTENDANT CONSOLE [A-
3] using NON-DELAY OPERATION [N-3].
3. Restriction from particular trunk routes is determined by the station's Route Restriction Class.
4. If a restricted station calls another station, the called station cannot use the CALL TRANSFER - ALL
CALLS - CCIS [C-50] feature to connect the calling station to a trunk route from which it is restricted. If
transfer is attempted, it will recall to the called station.
5. THREE-WAY CALLING [T-2] is denied if a restricted station calls another station and the called station
attempts to add on an outside party in a trunk route from which the calling station is restricted.
6. If a user accesses a Tie trunk to a PBX outside the CCIS network, access to outside exchanges is controlled
by the outside PBX.
7. For a particular station, Day mode and Night mode restrictions can differ.
8. Non-restricted stations within the systems can CALL TRANSFER - ALL CALLS [C-11] outgoing calls
to stations restricted by this feature.
9. Station line access to a given trunk group is controlled by assigning a Route Restriction class (RSC) to
each line. There can be a maximum of 15 different RSCs per system, each of which can be programmed
to restrict an assigned station from none, one or more than one trunk group (maximum 255 trunk groups
on NEAX2400 IPX).
10. Two outgoing trunk group restriction tables are provided per system. The Direct Dial Access table is
indexed when a user dials the trunk group access code, and the ATTENDANT CONSOLE [A-3] table is
indexed on Attendant-completed calls. The restriction options per RSC can differ per table thus allowing
Attendant-completion of outgoing calls for restricted stations.
11. TIE LINE ACCESS [T-3]: If the user accesses a Tie trunk to a distant PBX (outside the CCIS network),
access to outside exchanges can only be controlled by the distant PBX.
Interactions
1. Transferring restrictions may not be desired for a restricted station.
2. CALL TRANSFER-ALL CALLS [C-11]: Station A is allowed access to outgoing on route 1. Station B is
restricted access for outgoing on route 1 via RRI 2 & 3. The unrestricted Station A makes an outgoing call
on Route 1 and cannot use the CALL TRANSFER - ALL CALLS feature to connect station B to Route 1,
If CALL TRANSFER - ALL CALLS is attempted, station A is immediately rung back.
3. CONSULTATION HOLD [C-17]: Station A may consult with Station B when Route 1 is on soft hold.