Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 416 NDA-24297, Issue 1
I-21 Internal Zone Paging
Operating Procedure (cont’d)
b.) To answer by using Off-Hook key: Note 2
Note 1:
The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2: Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime
Line key after Off-Hook/Press Off-Hook.
Note 3: The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATION TONE CONTROL
D
TERM
DISPLAY
OPERATING
PARTY
CALLED
PARTY
OPERATING
PARTY
CALLED
PARTY
CALLING
PARTY
OPERATING
PARTY
CALLED
PARTY
CALLING
PARTY
(1) Receive a
call
(2) Perform the
SHF
(1) Special
Dial Tone can
be heard
(1) MSC
can be
heard
(3) Dial the
access code for
IZP [I-21] (IZP
key)
(2) 2
nd
Dial
Tone can be
heard
(4) Dial the IZP
group number
Note 3
(1)Chime(s)
canbeheard
Note 1
*P=Prime Line
(1) Lift the
Handset
(5) Replace the
handset
(2) MSC is
stopped
Two way
conversation
between the
calling and
called party
is made.
XX:XX DDD2
XFR
PG
PG GPNO PG XXXXX
P: flash
Voice Call is made from D
term
speakers in the IZP group.
XXXXX XXXXX
P: light
Two way conversation is made.
(time) XX:XX DDD2