Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 701
Save And Repeat - D
term
S-24D
Interactions
AKYD is assigned after ASDT is assigned. Assign a LEN as TEC 12.
Programming
STEP 1: AKYD -AssigntheD
term
according to the following parameters:
TN: 1
STN: Station Number
TP: Type of D
term
0/1:
RING:
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter.
KYN: Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key
2: Multi-line key
KD: Not assigned for Feature Key
FKY: Feature Key Number
FKY: = 7, SAVE & REPEAT
STEP 2: ADSL - Assign SN=0, 1, 2, 3, 4, 5, 6 and FKY=7 (Save and Repeat).
This command is used for assigning a function to each soft key.
FCCS Programming
No unique programming is required for the FCCS network.