Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 151
Call Pickup - Group - D
term
C-7D
Service Conditions (cont’d)
6. CALL TRANSFER - ALL CALLS: The capability to pick up the recall of CALL TRANSFER - ALL
CALLS when CALL PICKUP - GROUP is activated, is not available.
7. There is no limit to the number of groups per system.
8. A user cannot pick up a call in the EXPANDED CALL PICKUP GROUP when engaged in another call.
9. The allowable station number type for a member of CALL PICKUP GROUP or CALL PICKUP
EXPAND GROUP is the telephone number only.
10. The maximum number of stations per CALL PICKUP GROUP is 100.
11. The maximum number of stations per CALL PICKUP EXPAND GROUP is 100.
12. When both stations, a calling station and a station that picks up a call, place an another call on hold, this
service is activated on condition that all stations (the calling station, the station that picks up a call, a
ringing station and the held stations) belong to the same node. If any of stations belong(s) to the different
node, this feature is not activated.
13. When using the FCH card:
a.) Stations in four different nodes can be assigned to a CALL PICKUP GROUP or a CALL
PICKUP EXPAND GROUP.
b.) When a CALL PICKUP GROUP/CALL PICKUP EXPAND GROUP has stations that belong to
different nodes, and the multiple Call Pickup/Call Pickup Expand stations are ringing
simultaneously, if ringing stations belong to the same node, the user will pick up the call in
assigned order. However, if ringing stations belong to different nodes, the user cannot pick up the
call in assigned order or terminated order. The user will first pick up the call terminated to the
station belonging to the node of the user’s station.
Node A
Node B
No.3 No.4 No.5 No.1 No.2
CALL PICKUP GROUP
The number below the station is the assigned order.
Example:All the Stations No.1 through No. 5 belong to the same CALL PICKUP GROUP. When Stations No. 1, No. 3 and No. 5 are
ringing:
• If the user answers via Station No.4, the user will pick up a call terminated to Station No.5 first (this feature allows the user to
pick up from the next station in assigned order). The user will then pick up Station No. 3, if Station No. 3 is still ringing.
• If the user answers via Station No. 2, the user will pick up a call terminated to Station No. 1 first.