Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 463
LDN Night Connection - Outside L-30
FCCS Programming (cont’d)
STEP 2: ANPDN - Assign the first digit for Listed Directly Number (LDN) and forwarding destination.
TN: Tenant Number (1-255)
1st DC: 1st Digit Code (0-9,*,#)
CI: Connection Status Index (N = Normal/H = Hooking/B = Busy)
NND: Number of Necessary Digits (max. 6 digits)
BLF: Busy Lamp Field (0 = Out of Service/1 = In Service)
STEP 3: ASPAN - Assign the number of digit of access code for LDN and forwarding destination.
TN: Tenant Number (1-255)
ACC: Access Code (max. 6 digits)
CI: Connection Status Index (N = Normal/H = Hooking/B = Busy)
SRV: Kind of Service (Designate “TELN” for LDN, “OGC/OGCA/LCRS” for forwarding
destination.)
NND: Necessary Digits (1-16)
STEP 4: ALRTN - Assign Logical Route Number to Physical Route Number.
LGRT: Logical Route Number (1-89)
FPC: Fusion Point Code (1-253)
RT: External Route Number (1-255)
STEP 5: ASPD - Assign speed calling number to Abbreviated Digit Code (ADC).
TN: Tenant Number (1-255)
ADC: Abbreviated Digit Code (max. 4 digits)
CD: Desired Speed Calling Number (max. 24 digits)
Note: The user must be assigned this command at node which receives the LDN call.
STEP 6: ALDNN - Assign FPC of a node with attendant console which receives the LDN call by dialing
the LDN.
TN: Tenant Number (1-255)
LDN: Listed Directory Number (max. 16 digits)
FPC: Fusion Point Code of the node with attendant console which receives LDN calls
TYPE: Number Type of Night Mode destination number of LDN. Assign 3 (ADC).
ADC: Abbreviated Digit Code assigned by ASPF command
STEP 7: ACFR - Allow the Call Forwarding Restriction Class.
TN: Tenant Number (1-255)
TSFI: Transfer Service Feature Index (Assign 2 = Direct in Termination (Night only))
CCI: Call Category Index (Assign 1 = LDN (C.O. Line))
RES: RestrictionData(Assign1=Allowed)