Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 1034 NDA-24297, Issue 1
T-26 Toll Restriction - 3/6-Digit - CCIS
Programming (cont’d)
Notice that assignments for digit codes 90 and 91 which cover operator calls and all 1 + Area Codes
calls are not assigned. Digit Codes (DC) which are not assigned are automatically restricted.
AARP Command -
Not Required. This command is only required when TDI = 2 is assigned in ATDP.
Example 2 - RSC 2 Assignment
ATDP Command -
TDM/OG: O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT: 1 RSC: 2
DC: 92 TDI: 1 (Connection is Allowed)
Repeat these same assignments for Digit Codes (DC) 93 - 99 to allow all local office codes.
To allow Area Codes 718, 212, 201, & 914 repeat the ATDP command for the following Digit Codes:
DC: 91718 TDI: 1 (Connection is Allowed)
DC: 91212 TDI: 1 (Connection is Allowed)
DC: 91201 TDI: 1 (Connection is Allowed)
DC: 91914 TDI: 1 (Connection is Allowed)
This allows these specific Area Codes. All Area Codes not assigned are Automatically restricted.
AARP Command -
Not Required.
Example 3 - RSC 3 Assignment
ATDP Command -
TDM/OG:O (Outgoing Connection)
DAY/NIGHT:D (Day)
OGRT: 1 RSC: 3
DC: 92 TDI: 1 (Connection is Allowed)
Repeat these same assignments for Digit Codes (DC) 93 - 99 to allow all local office codes.
To allow Area Codes 718, 212, & 201 repeat the ATDP command for the following Digit Codes (DC):
DC: 91718 TDI: 1 (Connection is Allowed)
DC: 91212 TDI: 1 (Connection is Allowed)
DC: 91201 TDI: 1 (Connection is Allowed)
To allow office codes 239, 465, & 798 within the 914 Area Code, assign the ATDP command as
follows:
TDM/OG: O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT: 1 RSC:3
DC: 91914 TDI: 2 (Go to AARP Command)
NND: 6 (Begin restriction after 91914, i.e.; the 6th digit dialed.)
AARP Command -
OGRT: 1 RSC: 3 FLAG: 1
DC: 239 RES: 1 (Connection is Allowed)
Repeat these same assignments for the following Digit Codes
OGRT: 1 RSC: 3 FLAG: 1 DC: 465 RES: 1
OGRT: 1 RSC: 3 FLAG: 1 DC: 798 RES: 1