Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 230 NDA-24297, Issue 1
C-74 Call Forwarding - Don’tAnswer-Outside
C-74 Call Forwarding - Don’t Answer - Outside
General Description
This feature allows a call which originates from a station or trunk, and is destined for a station, to be routed to another
station outside the NEAX2400 IPX via the appropriate trunk line. This service feature can also be activated from a
D
term
multi-line.
Operating Procedure
To set
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - DON'T ANSWER - OUTSIDE access code (same as CALL
FORWARDING - DON'T ANSWER [C-3] access code); receive special dial tone.
3. Dial the desired target telephone number (or speed calling access code and abbreviated code). If the
ATTENDANT CONSOLE [A-3] is setting this feature, dial the access code, Tenant number, originating
telephone number, and then the desired outside number; receive service set tone.
To cancel
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - DON'T ANSWER - OUTSIDE cancel code, (same as CALL
FORWARDING - DON'T ANSWER [C-3] cancel code); receive service set tone.
To set from a multi-line D
term
1. Press the multi-line feature key to be used for CALL FORWARDING - DON'T ANSWER - OUTSIDE.
2. Lift the handset or press the SPEAKER key; receive dial tone.
3. Press CALL FORWARDING - DON'T ANSWER - OUTSIDE feature key; receive special dial tone.
4. Dial the desired target number (or speed calling access code and abbreviated code); receive service set
tone. The LED will light. The LCD displays:
5. Replace the handset or press the SPEAKER key.
6. The LED of the associated key lights on the D
term
to which the call is forwarded.
To monitor from a D
term
MY Line
1. Press the multi-line key for the station CALL FORWARDING - DON'T ANSWER - OUTSIDE is to
monitor.
Press CALL FORWARDING - DON'T ANSWER - OUTSIDE feature key. The LCD displays:
Target Number*
FORWARD SET
(Time Display)
FORWARD SET
(Time Display)
FORWARD XXXXXXXX
(Time Display)