Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 350 NDA-24297, Issue 1
F-2 FX Access
F-2 FX Access
General Description
This feature provides dial access to distant Central Offices using Foreign Exchange (FX) trunks. All incoming calls
to the NEAX2400 IPX from the FX Central Office area are placed to the listed Foreign Exchange Directory number
and are answered by the Attendant in a manner similar to LDN service. Outgoing calls can be made on an Attendant
handled basis using direct or dial access and/or on a direct basis by stations.
Operating Procedure
To place an outgoing FX call from a station
1. Lift the handset and receive dial tone.
2. Dial the FX trunk access code and receive second dial tone.
3. Dial the desired telephone number.
To answer an incoming FX call at the ATTENDANT CONSOLE [A-3]
1. The FX lamp flashes.
2. An audible signal is received.
3. Press the FX or ANSWER key to answer.
4. Process the call in a normal manner.
Service Conditions
1. One INCOMING CALL IDENTIFICATION [I-2] key may be used for all FX groups.
2. Access to various types of trunks may be denied to certain stations according to CLASS OF SERVICE -
INDIVIDUAL [C-15] programming.
3. TOLL DENIAL/TOLL DIVERSION [T-6] may be provided for FX ACCESS [F-2].
4. TOLL RESTRICTION - 3/6-DIGIT [T-7] may be provided for FX trunks on a per-route basis.
5. Care should be exercised in system data assignment when utilizing this feature in conjunction with LEAST
COST ROUTING - 3/6-DIGIT [L-5] since Foreign Exchange trunks may require that the digit 1 be dialed
as a prefix to the desired number.
Interactions
1. LEAST COST ROUTING - 3/6-DIGIT [L-5]: FX trunk groups may be assigned to a LEAST COST
ROUTING [L-5] list.
2. ROUTE ADVANCE [R-6]: This feature routes outgoing FX calls over alternate facilities when the first-
choice trunk group is busy.
3. UNIFORM CALL DISTRIBUTION [U-1]: This feature permits incoming calls, including FX calls, to be
terminated directly from the Central Office to the next idle station in a prearranged group of stations
without Attendant assistance.
4. DIRECT-IN TERMINATION [D-7]: This feature allows one FX trunk to terminate directly to a
designated station. Incoming FX calls to this station are queued if the station is busy.
5. OUTGOING TRUNK QUEUING [O-2]: This feature provides a means for users to dial a busy FX trunk
group to be automatically placed in a queue, and to be called back when a trunk in the trunk group becomes
available.