Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 845
Call Forwarding - Don’t Answer - CCIS C-47
Service Conditions (cont’d)
14. When an Attendant extends a call to a station in another node in the CCIS network, and that station has
set CALL FORWARDING-DON’T ANSWER - CCIS, the call will be forwarded if the called station does
not answer within a predetermined time period.
15. If separate access codes are programmed into system data for CALL FORWARDING-DON’T ANSWER
- CCIS and CALL FORWARDING-BUSY LINE - CCIS [C-46], separate feature keys must be
programmed on each D
term
to equip it for both features.
16. When OUTGOING TRUNK QUEUING - CCIS [O-12] is provided, a station can use this feature and one
of the other call forwarding features at the same time. When a trunk becomes available, ringback tone will
be to the forwarding, not the forwarded-to, station.
17. If any of the following restrictions are in effect at a forwarded-to station, incoming trunk calls to the
forwarding station will not be forwarded (intercept arrangements will apply):
a.) Fully Restricted Station
b.) Station Restricted from Outgoing Calls
c.) Toll Restricted Station
18. If a member of a UNIFORM CALL DISTRIBUTION (UCD) [U-1] group sets CALL FORWARDING-
DON’T ANSWER - CCIS, only UCD calls to that extension number are forwarded.
19. When a call is forwarded, the number recorded in the STATION MESSAGE DETAIL RECORDING [S-
10] is the forwarded-to telephone number.
20. CALL FORWARDING-DON’T ANSWER - CCIS can also be accessed from a D
term
via the dial pad or
SPEED CALLING-ONE TOUCH [S-26D]. If this feature is accessed via the dial pad, it must also be
cancelled via the dial pad.
21. When an Attendant extends a call to a station in the same node which has set CALL FORWARDING-
DON’T ANSWER - CCIS, the called station will ring for 30 seconds. If the call is not answered, it will
forward across CCIS.
Interactions
1. If access codes for CALL FORWARDING-BUSY LINE - CCIS and CALL FORWARDING-DON’T
ANSWER - CCIS are the same, only one key needs to be assigned in AKYD.
2. ACFO is applicable to DID, DIT, and TIE Line calls only.
3. A non-controlling UCD station is allowed to activate CALL FORWARDING-DON’T ANSWER - CCIS.
When this station sets call forwarding, calls directed to this station will be forwarded. The member station
is not removed from the UCD group under the conditions of the call forwarding feature used. When it is
the station’s turn to ring, that call is affected by CALL FORWARDING-DON’T ANSWER - CCIS.
4. CALL FORWARDING-DON’T ANSWER - CCIS to an Attendant Console will not operate when the
system is in Night Mode. If ATTENDANT NIGHT TRANSFER [A-19] is provided, the call is forwarded
to the ATTENDANT NIGHT TRANSFER station.
5. If the CALL FORWARDING-DON’T ANSWER - CCIS target station is a D
term
which has activated DO
NOT DISTURB [D-21D], call forwarding is not activated. The forwarding station will ring beyond the
timer set in System Data 1, Index 145.
6. When the CALL FORWARDING-DON’T ANSWER - CCIS feature is set from Station A to Station B,
and if Station A is idle and Station B is busy, Station A will ring beyond the timer set in System Data 1,
Index 145.
7. When a call is call forwarded, the destination station is recorded for STATION MESSAGE DETAIL
RECORDING [S-10].