Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 117
Call Forwarding - Busy Line - D
term
C-2D
Service Conditions (cont’d)
18. When a station sets CALL FORWARDING - ALL CALLS [C-5] to a pilot in a Hunt Group, and the pilot
activates CALL FORWARDING - BUSY LINE to another station, if the system parameters define the call
to hunt to the forwarded-to Station Hunt Group and all stations are busy, the calling party will hunt at the
called station's Hunt Group. If system parameters assign the call to hunt to the forwarding Station Hunt
Group and all stations are busy, the calling party will then hunt to the forwarding station's Hunt Group.
19. This service feature can be restricted according to the service restriction class of the D
term
MY Line. Even
after the CALL FORWARDING - BUSY LINE [C-2] has been set to a D
term
multi-line, incoming calls
to the multi-line cannot be transferred if the service restriction class of the MY Line restricts this service
feature.
20. A user may set CALL FORWARDING - BUSY LINE - D
term
for a multi-line appearance based on the
CLASS OF SERVICE - INDIVIDUAL [C-15], as assigned to the station setting the service. The figure
below is a simplified key sheet assignment for stations 200 & 201. The CLASS OF SERVICE -
INDIVIDUAL [C-15] for station 200 is allowed CALL FORWARDING - BUSY LINE - D
term
, but the
CLASS OF SERVICE - INDIVIDUAL [C-15] for station 201 is not. Station 200 is able to set CALL
FORWARDING - BUSY LINE - D
term
for station 201. The associated feature button LED on station 201
will illuminate.
Note: The FORWARD-BY key is same as the CALL FORWARDING - BUSY LINE feature key.
Even when a sub-line of D
term
is assigned as the destination station, the call is not forwarded if the MY
Line of that D
term
is not allowed CALL FORWARDING - DON'T ANSWER - D
term
.
21. This feature is applicable to CALL FORWARDING - OUTSIDE [C-28] and CALL FORWARDING/
MULTIPLE CALL FORWARDING - BUSY LINE - CCIS [C-46] [M-41].
22. When a user places a call to a busy station which has been set CALL FORWARDING-BUSY LINE [C-
2], the calling party can override the call forwarding feature, activating service features associated with
busy status such as CALL BACK [C-1], EXECUTIVE RIGHT-OF-WAY [E-1], STEP CALLS [S-13],
provided that the service feature class (SFC) of the calling party permits this feature. Otherwise, the call
is forwarded to a predetermined destination as usual.
23. This service is not available when the called party is the attendant console or monitoring station. However,
the service is available when these stations are designated as the transfer destination of CALL
FORWARDING - BUSY LINE service.
24. This service is available only when the called party is busy and has set CALL FORWARDING - BUSY
LINE. In case CALL FORWARDING - BUSY LINE is set as the second hop and after in the Multiple
Call Forwarding link, this service is not available.
25. This service is available in the following occasions:
a.) When the destination of the CALL FORWARDING - BUSY LINE service is the calling station.
MY LINE MULTI-LINE MY LINE MULTI-LINE
Station 200 Station 201
FORWARD-BY FORWARD-BY