Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 67
Attendant Overflow A-105
FCCS Programming (cont’d)
NND: Number of Necessary Digits (1-6)
BLF: Busy Lamp Field
STEP 4: ASPAL/ASPAN - Determine the kind of service and the service Access Code to be executed.
TN: Tenant Number (1-255)
ACC: Access Code (max. 6-digit)
CI: Connection Status Index (N=Normal, H=Hooking, B=Busy)
SRV: Kind of Service (TELN)
NND: Necessary Digit of Telephone Number
STEP 5: ASDT - Assign the station data for destination overflow station.
TN: Tenant Number (1-255)
STN: Station Number
LENS: Line Equipment Numbers
TEC: Telephone Class
SFC: Service Feature Restriction Class
STEP 6: ALGSL/ALGSN - Assign Telephone Number to the destination Station Number programed by ASDT
command above.
TYPE=1 (LENS is used to specify the Telephone station number)
UGN: User Group Number (Fixed to “1”)
TELN: Telephone Number (max. 16-digit)
FPC: Fusion Point Code (Only ALGSN)
LENS: Line Equipment Numbers of the destination Station Number
TYPE=2 (STN is used to specify the Telephone station number)
UGN: User Group Number (Fixed to “1”)
TELN: Telephone Number (max. 16-digit)
FPC: Fusion Point Code (Only ALGSN)
TN: Tenant Number (1-255)
STN: Station Number of destination
STEP 7: ACSIL - Assign overflowing destination of Attendant Console.
LGRT: Logical Route Number (1-899)
TK: Trunk Number (1-255)
CSI: Connection Service Index, assign “4 (Direct-In Termination (Night Mode))”.
UGN: User Group Number (Fixed to “1”)
Note 1
TELN: Telephone Station Number (max. 16-digit) Note 1
ADC: Abbreviated Digit Code (max. 4-digit) Note 2
NND: Digit Number of Access Code
Note 1: This parameter is displayed when assign CSC=2,3 or 4.
Note 2: This parameter is displayed when assign CSC=6 or 7.
STEP 8: ACFR - Assign the Call Forwarding Restriction data.
TSFI: Transfer Service Feature Index 3=Direct-In Termination (Day and Night), 4=Direct-In Inward
Termination (DID)
CCI: Call Category Index (1=LDN (C.O. Line), 4=Tie Line)
RES: Restriction Data (0=Transfer service is not allowed, 1=Transfer service is allowed)