Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 412 NDA-24297, Issue 1
I-21 Internal Zone Paging
Operating Procedure (cont’d)
b.) To answer by using Off-Hook key: Note 2
Note 1:
The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2: Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime
Line key after Off-Hook/Press Off-Hook.
Note 3: The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATION TONE CONTROL
D
TERM
DISPLAY
OPERATING
PARTY
CALLED
PARTY
OPERATING
PARTY
CALLED
PARTY
CALLING
PARTY
OPERATING
PARTY
CALLED
PARTY
CALLING
PARTY
(1) Receive a
call
(2) Perform the
SHF
(1) Special
Dial Tone can
be heard
(1) MSC
can be
heard
(3) Dial the
access code for
IZP [I-21] (IZP
key)
(2) 2
nd
Dial
Tone can be
heard
(4) Dial the IZP
group number
Note 2
(1)Chime(s)
canbeheard
Note 1
*P=Prime Line
(1) Lift the
Handset
(5) Replace the
handset
(2) MSC is
stopped
Two way
conversation
between the
calling and
called party
is made.
XXXXX XXXXX
XFR HOLD
PG HOLD
PG GPNO
PG XXXXX
P: flash
HOLD
Voice Call is made from D
term
speakers in the IZP group.
Two way conversation is made.
XXXXX XXXXX
P: light
HOLD
(time) XXXXX XXXXX