Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 347
Expanded Multiple Line Operation - D
term
E-26
Interactions (cont’d)
Serial Call [S-15]
Serial Call - Loop Release [S-64]
Serial Call - CCIS [S-52]
Serial Call - D
term
[S-127]
Executive Right-of-Way [E-1, 1D]
Call Back [C-1, 1D]
Message Reminder [M-19, 19D]
Brokerage - Hot Line [B-6]
Split Call Forwarding [S-99]
Call Waiting - Terminating [C-12]
CallWaiting-Answer-D
term
[C-27D]
Call Waiting - Originating [C-31]
Note: Boss-Secretary features are not available via ISW.
2. This feature does not support OAI/ACD related services.
3. This feature does not support Hotel related services.
4. This feature does not provide Privacy Release [P-18], if the Multiple Lines are programmed beyond
different IMGs.
5. Follow Phone [F-31] is not available for this feature.
Programming
STEP 1: ASYD -Flag“1” to SYS 1, Index 321, b0 (Extended Multiple Line Operation is allowed).
STEP 2: ASDT - A LEN equipped with a D
term
Circuit Board must be assigned a station number and a
Telephone Equipment Class (TEC) of 12.
STEP 3: AKYD - Assign a MY Line, a Prime Line, and various sublines to the D
term
s.
TN: 1
STN: Station Number
TP: Type of D
term
0/1
PL TN STN: Prime Line Tenant and Station Number
KYN: Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD: Not assigned for Feature Key
TN STN: Tenant Number and Station Number of Multi-line
RG: Ringing Assignment per Multi-line Appearance
0: No Ringing
1: Ringing in Day Mode Only
2: Ringing in Night Mode Only
3: Ringing in Day and Night Mode
FCCS Programming
No unique programming is required for the FCCS network.