Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 115
Call Forwarding - Busy Line - D
term
C-2D
Operating Procedure (cont’d)
To set CALL FORWARDING - BUSY LINE - D
term
to a D
term
multi-line
1. Press the multi-line key for which CALL FORWARDING - BUSY LINE - D
term
feature is to be set.
2. Lift the handset or press the SPEAKER key; receive special dial tone.
3. Press the CALL FORWARDING - BUSY LINE “FORWARD-BY” feature key; receive special dial tone.
4. Dial the desired target telephone number; receive service set tone. The LCD displays:
Target Station
5. The LED of the associated feature key lights on the D
term
for which this multi-line is a MY Line.
6. If the target station is the Attendant, the LCD displays:
7. Replace the handset or press the SPEAKER key.
To monitor CALL FORWARDING - BUSY LINE to a D
term
multi-line
1. Press the multi-line key for which CALL FORWARDING - BUSY LINE - D
term
is to be monitored.
2. Press the FORWARD-BY key. The LCD displays:
Target Station
If the target station is the Attendant Console:
To cancel CALL FORWARDING - BUSY LINE to a D
term
multi-line
1. Press the multi-line key for which CALL FORWARDING - BUSY LINE - D
term
feature is to be cancelled.
2. Lift the handset or press the SPEAKER key; receive dial tone.
3. Press the FORWARD-BY key; receive service set tone. The LED of the associated feature key will go out
on the D
term
for which this multi-line is a MY Line. The LCD displays:
4. Replace the handset or press the SPEAKER key.
Service Conditions
1. This feature may be set and cancelled by the user or the Attendant.
2. CALL FORWARDING - BUSY LINE - D
term
data remains programmed, even if the system is
reinitialized or a power failure occurs.
FORWARD SET XXXX
(Time Display)
FWD SET OPR
(Time Display)
FORWARD
XXXX
(Time Display)
FWD SET OPR
(Time Display)
FORWARD CANCEL
(Time Display)