Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 523
Multi Channel Recording - DAT M-48
M-48 Multi Channel Recording - DAT
General Description
This feature allows a user to record a message to multiple Digital Announcement Trunks (DATs) in a single
operation. The message recorded in a trunk is automatically copied to other trunks one after another.
Operating Procedure
1. Recording by designating RT and TK:
a.) Lift a handset; receive dial tone.
b.) Dial the MULTI CHANNEL RECORDING (RECORDING) access code from the station;
receive special dial tone.
c.) Enter Route Number and Trunk number; the special dial tone stops.
Hear service set tone when #is pressed. The service set tone continues for 3 seconds.
d.) Start your recording when the service set tone is stopped.
e.) Replace the handset to finish recording.
Note: The recording length is a multiple of 2 (= 2n sec).
2. Playback by designating RT and TK
a.) Lift a handset; receive dial tone.
REC
(Time Display)
REC
005 001
Route Trunk
RECORDING START
DDD 1
Recording Time Note
RECORDING END
In 5 seconds
(Time Display)