Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 369
Flexible Routing - FCCS F-35
Interactions (cont’d)
Note 3: The display is changed depending on the specification of ACIS.
Note 4: Has priority over the FLEXIBLE ROUTING - FCCS service. FLEXIBLE ROUTING - FCCS is activated
only when the FCCS trunk for the destination station is busy.
Note 5: A trunk is used after the call encounters station busy between the stations in the FCCS network.
Note 6: Available only at the time of the data assignment for alternative route.
2. The following services are available when the alternative route is CCIS and the service is provided in the
CCIS network:
CALL FORWARDING - ALL CALLS - CCIS [C-45]
CALL FORWARDING - BUSY LINE - CCIS [C-46]
CALL FORWARDING - DON’T ANSWER - CCIS [C-47]
CALLING NUMBER DISPLAY - CCIS [C-52]
DATA PRIVACY ON DEMAND - CCIS [D-68]
DIGITAL DISPLAY - CCIS [D-72]
DISTINCTIVE RINGING - CCIS [D-75]
MESSAGE REMINDER - CCIS [M-34]
NAME DISPLAY - SYSTEM - CCIS [N-37]
STEP CALL - CCIS [S-59]
VOICE CALL - CCIS [V-7]
Programming / FCCS Programming
Before this procedure, data setting for station-to-station connection within the FCCS network and the
Flexible Route Numbering Plan (LCR/LCRS data) should be programmed.
STEP 1: ANPD - Reserve the number level for the trunk access.
STEP 2: ASPA - Assign SRV=LCR, LCRS and the access code to seize the flexible trunk.
STEP 3: AMND - Assign the maximum necessary digits data.
STEP 4: ARNP - Assign the access code for each route.
STEP 5: AOPR - Assign the outgoing Route selection pattern.
STEP 6: AFRS - Assign the flexible route selection data.
STEP 7: ARTD - Assign the route data. For CCIS data, assign line signals for each Bch and Dch route.
STEP 8: ATRK - Assign the trunk data.
STEP 9: When the CCIS line is used for flexible routing, CCIS data is programmed via ADPC, ACIC and
ACSC.
STEP 10: AFRFL - Assign the Flexible Route data.
TN: Tenant Number of the calling party
FPC: Fusion Point Code of the destination node
ACC: Access code for the Flexible Routing (to C.O. or Tie Line), the same number assigned via
ASPA for LCR/LCRS/