NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 495
Multiple Call Forwarding - Busy Line M-24
Service Conditions (cont’d)
11. Busy Services such as EXECUTIVE OVERRIDE [E-1], CALL BACK [C-1], etc.:
a.) Busy service is provided to the busy line closest to the originally called station.
12. DIT, NIGHT CONNECTION - FIXED [N-1]:
a.) For CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING - BUSY LINE [C-
2], a forward check is made up to 5 times by system data.
b.) In DIRECT-IN TERMINATION [D-7], if a line is busy, CALL FORWARDING - BUSY LINE
[C-2] to the Attendant is not activated. Instead, the destination for the call can be specified by
system data:
System Data 2 Index = 11
Bit 7 = 0 - Call is routed to the Attendant Console.
Bit 7 = 1 - Call is placed in queue until the called station becomes idle.
13. A telephone number must be set to the call forwarding destination.
14. A call cannot be forwarded more than five times.
15. The number of times is assigned by system data.
16. The OAI monitor number and the ACD pilot number cannot be assigned as the Call Forwarding target
telephone number.
Interactions
1. If access codes for CALL FORWARDING-BUSY LINE [C-2] and CALL FORWARDING-DON’T
ANSWER [C-3] are the same, only one key needs to be assigned in AKYD or ADSL, and only one access
code needs to be assigned in ASPA.
2. When CALL WAITING [C-12], ATTENDANT CAMP-ON WITH TONE INDICATION [A-1], or
CALL BACK [C-1] is directed toward Station A, with CALL FORWARDING-BUSY LINE [C-2] set to
Station B, Station A will receive call waiting tones when Station B is also busy.
3. A non-controlling UCD station is allowed to activate CALL FORWARDING-BUSY LINE [C-2]. When
this station sets CALL FORWARDING-BUSY LINE [C-2], only directly-dialed calls to this station are
call forwarded.
4. If a controlling station of a UCD group sets CALL FORWARDING-BUSY LINE [C-2], forwarding will
not take place. The incoming call will follow the UCD hunt.
S
EDCB
A
F
Hunting Group #1Hunting Group #2
Hunting Group #3
Hunting Group #4