Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 354 NDA-24297, Issue 1
F-4D Flash Entry - D
term
F-4D Flash Entry - D
term
General Description
ThisfeatureallowsaD
term
user to insert a switch hook flash as the first digit in a stored SPEED CALLING-ONE
TOUCH-D
term
[S-26D] number.
Operating Procedure
To add a flash to a stored SPEED CALLING-ONE TOUCH-D
term
[S-26D] number to a D
term
1. Stay on-hook.
2. Press the Feature key and the SPEED CALLING-ONE TOUCH-D
term
[S-26D] key; the LCD display will
either be blank or a display of previously stored digits.
3. Press RECALL key as first digit; a switch hook flash is entered into the memory and the LCD displays:
4. If a feature access code is to follow the Flash Entry, dial the desired digits.
5. Press the Feature key; the LCD displays:
To add a flash to a stored SPEED CALLING - ONE TOUCH [S-32D] number to a D
term
1. Stay on-hook.
2. Press the feature key and the SPEED CALLING - ONE TOUCH [S-32D] key; LCD will either be blank
or display previously stored digits.
3. Press the RECALL key as the first digit; a switch hook flash is entered into the memory and the LCD
displays:
4. If a feature access code is to follow the FLASH ENTRY, dial the desired digits.
5. Press the feature key; the LCD displays:
Service Conditions
1. A FLASH ENTRY may be entered only as a first digit. For example:
a.) Call Transfer - “!+Telephone Number”
b.) Busy Service - “+Calling Waiting - Originating access code”“!+Executive Right-of-Way access
code”
c.) Call Hold - “!+Call Hold access code”
2. A FLASH ENTRY, stored as a flash, may be used only once, unless digits are dialed between use.
!
(Time Display)
SPEED SET
(Time Display)
!
(Time Display)
SPEED SET
(Time Display)