Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 456 NDA-24297, Issue 1
L-28 LDN Night Connection
FCCS Programming
The following command assignments are required to use this feature via FCCS link.
When destination number is programmed by using TYPE = 1 (TELN) of ALDNN command
STEP 1: ASYDL - System Data 1, Index 640, Bit 0-7. Assign FPC of a node which transmits Day/Night
changeover information.
System Data 1, Index 704-735. Assign FPC of a node which receives the Day/Night changeover
information transmitted from the node assigned by System Data 1, Index 640, Bit 0-7 above.
STEP 2: ANPDN - Assign the first digit for Listed Directly Number (LDN) and forwarding destination.
TN: Tenant Number (1-255)
1st DC: 1st Digit Code (0-9,*,#)
CI: Connection Status Index (N = Normal/H = Hooking/B = Busy)
NND: Number of Necessary Digits (max. 6 digits)
BLF: Busy Lamp Field (0 = Out of Service/1 = In Service)
STEP 3: ASPAN - Assign the number of digit of access code for LDN and forwarding destination.
TN: Tenant Number (1-255)
ACC: Access Code (max. 6 digits)
CI: Connection Status Index (N = Normal/H = Hooking/B = Busy)
SRV: Kind of Service (Designate TELN = Telephone Number)
NND: Necessary Digits (1-16)
STEP 4: ALGSN - Assign Telephone Number to Night Mode destination number (Station Number).
TYPE = 1 (When LENS is used to specify the Telephone Number)
UGN: User Group Number (Fixed to “1”)
TELN: Telephone Number (max. 16 digits)
FPC: Fusion Point Code of the designated LENS
LENS: Line Equipment Numbers of physical station
TYPE = 2 (When STN is used to specify the Telephone Number)
UGN: User Group Number (Fixed to “1”)
LDN: Listed Directory Number (max. 16 digits)
TN: Tenant Number (1-255)
STN: Station Number
STEP 5: ALDNN - Assign FPC of a node with attendant console which receives the LDN call by dialing
the LDN.
TN: Tenant Number (1-255)
LDN: Listed Directory Number (max. 16 digits)
FPC: Fusion Point Code of the node with attendant console which receives LDN calls
TYPE: Number Type of Night Mode destination number of LDN. (Designate 1 = TELN.)
STN: Station Number of Forwarding Destination (max. 16 digits) or specific attendant console
number assigned by ASAT command.
STEP 6: ACFR - Allow the Call Forwarding Restriction Class.
TN: Tenant Number (1-255)
TSFI: Transfer Service Feature Index (Assign 2 = Direct in Termination (Night only))
CCI: Call Category Index (Assign 1 = LDN (C.O. Line))
RES: RestrictionData(Assign1=Allowed)