Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 792 NDA-24297, Issue 1
V-2D Voice Call - D
term
V-2D Voice Call - D
term
General Description
This feature provides a voice path between two D
term
sets. This path exits from the calling party to the called party’s
built-in speaker. If the called party’s MIC key is on, the called party can converse hands-free.
Operating Procedure
From one D
term
to another D
term
1. The originating D
term
user dials the desired telephone number and receives a ringback tone.
2. The calling party presses the VOICE CALL feature key. A signal tone (two bursts) is transmitted over the
called party’s speaker. The calling party’s LCD displays:
From a single-line set to a D
term
1. The single-line set user dials the desired D
term
number and receives a ringback tone.
2. The calling party presses the switch hook, and dials VOICE CALL access code. A signal tone is
transmitted over the called party’s speaker.
3. The calling party announces the call over the built-in speaker.
Service Conditions
1. After a voice call has been activated, the called station will appear busy on multi-line sets displaying the
called station.
2. A voice call will follow CALL FORWARDING-ALL CALLS [C-5] and CALL FORWARDING-BUSY
LINE/DON’T ANSWER [C-2, C-3].
3. A voice call will terminate at the station MY-LINE [M-23D].
4. When a called station is not a D
term
, a reorder tone will be sent to the calling party followed by a ringback
tone.
5. Only the called station can respond using HANDS-FREE ANSWER BACK-D
term
[H-4D].
6. If the called station is restricted from VOICE CALL SERVICE by Class of Service, status of the calling/
called party is as follows:
a.) Calling party
Single Line: Receives ringback tone after hearing reorder tone for up to 30 seconds or by
pressing the switch hook during reorder tone.
D
term
: When using the VOICE key: Receives ringback tone, and LCD displays VOICE
REST for 5 seconds.
When using an access code, hear reorder tone, and LCD displays VOICE REST for
5 seconds. After hearing reorder tone for 30 seconds or after pressing switch hook,
receives ringback tone.
b.) Called party’sD
term
continues to ring.
7. STATION MESSAGE DETAIL RECORDING [S-10] is not available for this service.
VOICE
(Time Display)
XXXX
Called Number