Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 650 NDA-24297, Issue 1
S-6 Station-Controlled Conference
Programming
STEP 1: ANPD - A number level must be reserved for station numbering plan. In an existing system, a station
level will already be established. If a vacant level does exist, it may be used to create 2 or 3-digit
station numbering. For example:
TN: 1 DC: 3 CI: N, H, BNND: 1 BLF: 1-On
STEP 2: ASPA - For the desired station numbering assign SRV = STN (Station). For example:
ACC: 3 CI: N, H, B SRV = STN (Station)
STEP 3: ASDT - Assign all ports of the PA-CFTB as DP/PB stations; TEC = 3. Based on the example data
assignments in ANPD, the station numbers will reside in level 3.
Example data assignments. (PA-CFTB located in PIM 1, Group = 03):
STEP 4: ASHP - Assign to a STATION HUNTING-TERMINAL [S-9] group the pilot and stations of the PA-
CFTB located on levels 1-7. For example:
TN: 1
STN: 3201
CNT: 7
STN: 3202, 3203, 3204, 3205, 3206, 3207
In this example, Ext. 3201 is the Pilot number of the Conference Bridge. Do not assign the Conference
Leader to this group. Before or after all Conference participants are connected to the PA-CFTB, the
Conference Leader directly calls the Conference Leader Port; for this example Ext. 3200.
PA-CFTB
PORT LEN
STATION
NUMBER TEC SFC RSC REMARKS
0 001030 3200 3 1 1 Conference Leader
1 001031 3201 3 1 1
Conference
Participant
Ports
2 001032 3202 3 1 1
3 001033 3203 3 1 1
4 001034 3204 3 1 1
5 001035 3205 3 1 1
6 001036 3206 3 1 1
7 001037 3207 3 1 1