Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 46 NDA-24297, Issue 1
A-52 Account Code - Attendant
A-52 Account Code - Attendant
General Description
This feature provides the ATTENDANT CONSOLE [A-3] with the capability to enter an Account Code into the
system after talking with a CO outgoing/incoming call.
Operating Procedure
The Attendant talks with the CO trunk call
1. Press the START key.
2. Dial the Account Code feature access code. Service set tone is heard.
3. Dial the Account Code (up to 10 digits).
4. Dial the desired telephone number.
Service Conditions
1. The Account Code may be a maximum of 10 digits.
2. When the Account Code is entered again for the same call and station, the last code entered will be
recorded on SMDR [S-10, 47].
3. Account Code dialing is available for an ATTENDANT CONSOLE [A-3] connected to a trunk.
4. The feature access code for Account Code will be a maximum of 3 digits.
5. An Attendant can enter an Account Code of fewer digits than the maximum length defined, indicating the
end of entry by the pound “#” key.
Programming
STEP 1: ASYD - System Data 1, Index 43, bit #2. Is service set tone sent after the ASPA access code for
ACCOUNT CODE? 0/1: No/Yes. Assign data “1”.
System Data 2, Index 3, bit 4. Is ACCOUNT CODE used with Authorization Code? 0/1: No/Yes.
System Data 1, Index 93, bit #6 = 0.
STEP 2: ANPD - Reserve a number level for service feature access. Assign Connection Index, CI = N, H, B;
Normal, Hooking, and Busy (applicable to any service feature assigned to this level). Assign NND in
accordance with a predetermined numbering plan.
STEP 3: ASPA - For SRV = SSC (Service Code), SID = 41, assign the access code. Assign the number of
digits in the ASPA service feature access code plus the number of digits that will appear in the
ACCOUNT CODE for the NND parameter. When ACCOUNT CODE operates with
AUTHORIZATION CODE [A-20], the above assignment is omitted. In ASPA, assign for SRV = SSC
(Service Code), SID = 42.
The NND value will include the number of digits in the ASPA service feature access code plus the
number of digits that appear in the ACCOUNT CODE.
For example:
45 - 511234 - 617- 555 - 2323
2+6= 8
ACC + ACCT CODE = NND