Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 538 NDA-24297, Issue 1
M-101 MF ANI to SMDR
FCCS Programming (cont’d)
When Calling Number is output to SMDR, the following expanded format is used.
System Data 1, Index 288, Bit 5. Expanded SMDR Output for SMDR A Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 290, Bit 5. Expanded SMDR Output for SMDR B Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 292, Bit 5. Expanded SMDR Output for SMDR C Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 294, Bit 5. Expanded SMDR Output for SMDR D Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 296, Bit 0. Output of Calling Number (ANI Information). 0/1 = Out/In Service.
Assign data “1”.
System Data 1, Index 300, Bit 0. 0/1 = Billing information is sent to the Main Node in Expanded
SMDR format if CENTRALIZED BILLING - CCIS [C-55].
STEP 2: ARTDN - Assign route class data for the C.O. trunk.
RT: 1
15-LSG :3 50-DPLY :1
When Calling Number is output to SMDR:
RT: 1
10-SMDR :1
Assign Route Class Expansion Data: CNI - 1. SVI: 1645 = 1
When My Line is Prime Line, Call Id Change Display Key is effective while terminating or in
conversation.
When My Line is not Prime Line, Call Id Change Display Key is effective while in conversation.
However, display pattern returns to the original setting when answering, holding, or transferring the
call.
Note: When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
H = Origination
I = Termination
J = Station-to-Station
S
T
X
OKH
/
I
/
J
! OFFICE CODE OF
CALLED PARTY
(FOR CCIS)
AUTH
CODE
Identifier:
0 = Output is not available
1 = Displayed
2 = Display denied
3 = Service is not available
4 = Origination from public pay phone
Note:
For 0, 2 and 3, the ANI number is not output.
AANI
NO.
ZE
T
X
A = ANI Information
Z = End of SMDR
Information
1 96 104 129 130 131 1622