Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 146 NDA-24297, Issue 1
C-7 Call Pickup - Group
Service Conditions (cont’d)
14. The number of CALL PICKUP GROUPs or CALL PICKUP EXPAND GROUPs is not limited.
15. A user cannot answer an incoming call to the station in another CALL PICKUP GROUP or CALL
PICKUP EXPAND GROUP.
16. Even if a station has been assigned to the existing CALL PICKUP GROUP or CALL PICKUP EXPAND
GROUP by Physical Station Number, the station can also be assigned to the same CALL PICKUP
GROUP or a CALL PICKUP EXPAND GROUP via FCCS service.
17. When the station holds a call (switch hook flash or Call Hold) which terminated through FCCS link, the
station cannot pick up a call via CALL PICKUP/CALL PICKUP EXPAND.
18. When both stations, a calling station and a station that will picks up a call, place another call on hold, this
service is activated on the condition that all the stations (the calling station, the station that picks up the
call, the ringing station, and the held stations) belong to the same node. If any of the stations belong(s) to
a different node, this service is not activated.
19. The CALL PICKUP - GROUP/CALL PICKUP EXPAND GROUP can be set on a node basis, even in the
use of telephone numbers. In other words, the features are available via the data written on the Local Data
Memory (LDM), not only on the Data Memory (DM) or the Network Data Memory (NDM). The
following are conditions in this case:
a.) The features are to be programmed by using the telephone number (TELN) of each station.
b.) A maximum of 100 stations can be assigned per CALL PICKUP GROUP.
c.) A maximum of 100 stations can be assigned per CALL PICKUP EXPAND GROUP.
d.) A station can belong to one CALL PICKUP GROUP only.
No.1
No.3
No.4
No.2
No.5
CALL PICKUP EXPAND
GROUP C
CALL PICKUP
GROUP B
CALL PICKUP
GROUP A
Node B
Node C
Node D
Node A
CALL PICKUP EXPAND GROUP
The number below the station is the assigned order.
Example: All the stations No.1 through No. 5 belong to the same CALL PICKUP GROUP Expand Group C.
When Stations No. 2 through No. 5 are ringing:
• If the user answers via Station No. 1, the user will pick up a call terminated to Station No. 3 first.
• If the user answers via Station No. 5, the user will pick up a call terminated to Station No. 2 first.