Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 878 NDA-24297, Issue 1
C-163 CCIS Networking via IP
Service Conditions (cont’d)
10. The table below shows CCIS service features to be provided beyond the nodes:
11. This feature does not support Broad Band Services H0/H1.
12. This feature can use Link Re-connection function. At this time, service conditions are the same as those
for the normal CCIS network.
13. PAD can be provided for “receive” control only.
14. IPTRK-related tandem connection is not provided.
SERVICE FEATURE NAME CONDITION
A-45 Attendant Camp-On with Tone Indication - CCIS Provided
B-9 Busy Verification - CCIS Provided
C-44 Call Back - CCIS Provided
C-45 Call Forwarding - All Calls - CCIS Provided
C-46 Call Forwarding - Busy Line - CCIS Provided
C-47 Call Forwarding - Don’t Answer - CCIS Provided
C-50 Call Transfer - All Calls - CCIS Provided
C-54 Call Transfer - Attendant - CCIS Provided
C-55 Centralized Billing - CCIS Provided
C-57 Centralized System Management Report - CCIS Provided
D-68 Data Privacy on Demand - CCIS Provided
D-71 Dial Access to Attendant - CCIS Provided
D-74 Direct Termination - CCIS Provided
D-75 Distinctive Ringing - CCIS Provided independently
E-8 Executive Right of Way - CCIS Provided
H-12 Hot Line - CCIS Provided independently
I-17 Individual Attendant Access - CCIS Provided
M-34 Message Reminder - CCIS Provided
M-34D
Message Reminder - D
term
-CCIS
Provided
M-35 Message Waiting Lamp Setting - Attendant - CCIS Provided
M-36 Message Waiting Lamp Setting - Station - CCIS Provided
N-37 Name Display - System - CCIS Provided independently
O-11 Off-Hook Queuing - CCIS Provided
S-52 Serial Call - CCIS Provided
S-59 Step Call - CCIS Provided
S-73 Supervisory Call - CCIS Provided
V-7 Voice Call - CCIS Provided