Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 367
Follow Phone F-31
Service Conditions (cont’d)
20. When activating this service, swap of the Speed Calling - One Touch key data start upon replacement of
the handset. It takes approximately 42 seconds for the Speed Calling key data to swap, and during this
time, Follow Phone Service and Speed Calling - One Touch operations are restricted.
21. After this service is activated, and if DM load reset is activated before the data is backed up to the hard
disk, the stations return to the previous status. However, this is not the case with the Speed Calling - One
Touch keys.
22. The DSS Console data does not swap. The My Line of the connected D
term
may swap, but in this case,
reassignment of DSS data and cabling will be necessary. The above is the same when using DSS as an
Add-On Module.
23. This feature is only available for stations in the same node within the FCCS network.
Interactions
This service is restricted for a D
term
using Expanded Multiple Line Operation - D
term
[E-26].
Programming
STEP 1: ANPD - Assign the minimum necessary number of digits for the first number of the SWAP access
code.
STEP 2: ASPA - Assign the access code for SWAP. CI = N (Normal), SRV = SSCA (Service Code Appendix),
SIDA = 96, SWAP.