Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 29
Authorization Code A-20
A-20 Authorization Code
General Description
An AUTHORIZATION CODE is a numerical code dialed by users (up to 10 digits), which will override the station
CLASS OF SERVICE - INDIVIDUAL [C-15] for facility access restriction.
The AUTHORIZATION CODE can be masked on the D
term
display if necessary using the AUTHORIZATION
CODE DISPLAY ELIMINATION [A-99].
When a wrong code is received from a station/trunk, detailed information on the unauthorized user is output as
System Message [26-M]. This message is Toll Fraud Report.
Operating Procedure
There are two procedures for entering an AUTHORIZATION CODE in the system database. One of the following
choices will be employed:
Procedure 1
• Without an ACCOUNT CODE [A-18]:
1. Lift the handset and receive dial tone.
2. Enter the feature Access Code and receive service set tone.
3. Enter the AUTHORIZATION CODE (up to 10 digits).
4. Receive dial tone.
5. Enter the number to be called.
Note:
The feature access code for AUTHORIZATION CODE will be a maximum of three digits.
• With an ACCOUNT CODE [A-18]:
1. Lift the handset and receive dial tone.
2. Enter the feature Access Code and receive service set tone.
3. Enter the AUTHORIZATION CODE and receive second service set tone.
4. Enter the ACCOUNT CODE [A-18] and receive dial tone.
5. Enter the number to be called.
Procedure 2 (only for LEAST COST ROUTING [L-5] calls)
• Without an ACCOUNT CODE [A-18]:
1. Lift the handset and receive dial tone.
2. Enter the number to be called.
3. If an AUTHORIZATION CODE is required, the caller will receive special dial tone.
4. If special dial tone is received, enter the AUTHORIZATION CODE (up to 10 digits) or the call is denied.
• With an ACCOUNT CODE [A-18]:
1. Lift the handset and receive dial tone.
2. Enter the feature access code for the ACCOUNT CODE [A-18] and receive service set tone.
3. Enter the ACCOUNT CODE [A-18] and receive dial tone.
4. Enter the number to be called.
5. If AUTHORIZATION CODE is required, the caller will receive special dial tone.
6. If special dial tone is received, enter AUTHORIZATION CODE (up to 10 digits) or the call is denied.
Note:
The feature access code for ACCOUNT CODE will be a maximum of three digits.