Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 565
Off-Hook Queuing O-7
FCCS Programming (cont’d)
CI: B = Busy (for Entry), N = Normal (for Cancel)
SRV: SSC
SID: 19 - OG Queuing - Entry
CI: N = Normal
SID: 20 = OG Queuing - Cancel
Note 1: When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Note 2: The current data should also be set in addition the above-mentioned commands.
The command to be set to the node accommodating the trunk: ARTD
The command to be set to all the nodes: ASYD, ASFC