Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 617
Restriction from Outgoing Calls R-4
Interactions (cont’d)
3. CONSULTATION HOLD [C-17]: Station A may consult with station B when Route 1 is on Soft Hold.
4. THREE-WAY CALLING [T-2]: Station A cannot include restricted Station B in a Tree-Way Calling
connection with Route 1.
5. DAY/NIGHT CLASS OF SERVICE [D-15]: Restricted Station B may be allowed access to Route 1 when
the system is placed in the NIGHT mode. See DAY/NIGHT CLASS OF SERVICE [D-15].
6. RESTRICTION FROM OUTGOING CALLS are constructed on a per-route restriction basis. Two Route
Restriction Indexes are constructed: RRI 2, Outgoing Calls via the Attendant Console and RRI 3,
Outgoing Calls via Direct Dial Access.
Programming
STEP 1: ASYD - System Data 1, Index 75. Should the following commands be developed for Day/Night? 0/1:
No/Yes.
Bit 0- Develop ARSC command for Day/Night?
Bit 3- Develop ATDP command for Day/Night?
System Data 2, Index 1, Bits 4 & 5. Should a Toll-Restricted station be routed to the Attendant
Console or receive reorder tone?
Reorder Tone: Bit 4 = “0”,Bit5=“0”.
Attendant Console: Bit 4 = “0”,Bit5=“0”.
Route Restriction Class
STEP 2: ARSC - Sixteen different Route Restriction Classes may be constructed to either allow, deny, or toll
restrict access to the various routes of the system. Assign the RSC using Route Restriction Indexes 2
(outgoing via the Attendant Console) and 3 (Outgoing Direct).
STEP 3: ASDT - Assign Tenant No., Station No., LENs, and the Telephone Equipment Class (TEC) to the
station. This is used in regular Business systems. The Service Feature Class (SFC) and Route
Restriction Class (RSC) are also assigned to the telephone.
TN: Tenant Number
STN: Station Number
LEN: Line Equipment Number (6 digits)
TEC: Telephone Class (1-31)
1: DP (10pps)
2: PB
3: DP/PB
12: D
term
13: Data terminal Via D
term
14: Hot Line
15: CAS Line
16: Data Terminal Via Data Module
18: Virtual Circuit
23: ISDN Terminal
27: Eight Conference Equipment
RSC: Route Restriction Class (0-15) For assignment of RSC, ARSC command.
SFC: Service Feature Class (0-15) For assignment of SFC, ASFC command.