Filter
Top Products
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 535
Message Waiting Indication - D
term
M-85D
M-85D Message Waiting Indication - D
term
General Description
This feature allows Message Waiting (MW) information to be displayed on the middle line (24 digits) of the LCD.
Operating Procedure
No manual operation is required.
Service Conditions
1. The LCD displays the following information, when MESSAGE WAITING INDICATION - D
term
is
activated:
2. When this service is assigned to a D
term
with a 1-line LCD, the service is not available, and the display
remains unchanged.
3. This service can be controlled via MAT command program.
4. This service is available only when OAI service is not available (SYS1, Index=79, b6=1). When OAI
service is available (SYS1, Index=79, b6=0), the information cannot be displayed on the lower line of
LCD, but will be displayed on the upper line.
5. While Message Waiting information control is being executed to a D
term
equipped with a 2-line LCD by
this service, time information is not displayed on the LCD. When Message Waiting information control is
cancelled, the time information display is resumed.
6. For the FCCS network, this feature is available for a telephone number having less than 7 digits.
Programming
STEP 1: ASYD - System Data 1, Index 79, Bit 6 = 1.
STEP 2: AKYD -AssignthefollowingdatatotheD
term
that executes this service.
(MWD = 1: Message Waiting Indication in Service)
FCCS Programming
No unique programming is required for the FCCS network.
Initial Display
(Time Display)
10:00 AM FRI 01 JAN 1999
MW
When controlled by
MCI, Attendant or
station