Filter
Top Products
NEAX2400 IPX Feature Programming Manual
Page 500 NDA-24297, Issue 1
M-25 Multiple Call Forwarding - Don’tAnswer
Service Conditions (cont’d)
b.) The Attendant Console key that lights when a call is forwarded to the console depends on the
forwarding status of the originally called station (except in case c). The following table shows the
key that will light (e.g., if the forwarding status of the originally called station is CALL
FORWARDING - BUSY LINE [C-2], and the call is from a station, then the BUSY key will
light).
c.) If the call is forwarded by CALL FORWARDING - DON'T ANSWER [C-3] at any point in a
forward sequence, the NANS key on the Attendant Console will light, even if the call status of the
originally called station is CALL FORWARDING - ALL CALLS or CALL FORWARDING -
BUSY LINE.
7. Forwarding to a D
term
:
a.) The calling D
term
's display will show the number of the called station on the left, and the number
of the station being rung on the right. The display on the ringing D
term
will show the number of
the originally called station on the left, and the number of the calling station on the right.
b.) The forwarding status of the originally called station is shown on the far left of each D
term
's
display: FDB for CALL FORWARDING - BUSY LINE or FDA for CALL FORWARDING -
ALL CALLS.
8. UCD Groups:
a.) If the destination of a CALL FORWARDING - DON'T ANSWER [C-3] is a UCD group control
station, the call will be forwarded into the UCD group.
b.) If the destination of a CALL FORWARDING - BUSY LINE [C-2] or a CALL FORWARDING -
ALL CALLS [C-5] forward is a UCD group control station, the call will be forwarded into the
UCD group.
9. Hunting:
a.) If the final destination station of a MULTIPLE CALL FORWARDING-DON’T ANSWER is a
controlling station in a STATION HUNTING-TERMINAL [S-9] or a member station of a
STATION HUNTING-CIRCULAR [S-7], then hunting will take place if that destination station
is busy.
10. An Applications Floppy Disk is needed to permit the CALL FORWARDING-DON’T ANSWER [C-3]
call to be transferred up to five times by CALL FORWARDING-ALL CALLS [C-5] and CALL
FORWARDING-BUSY LINE [C-2].
11. For the FCCS network, assign ASYDN SYS1, index 69, b7=1 (MULTIPLE CALL FORWARDING-
DON’T ANSWER is in service).
12. The OAI monitor number and the ACD pilot number cannot be assigned as the Call Forwarding target
telephone number.
FORWARDING STATUS OF ORIGINALLY CALLED STATION
CALL FORWARD -
ALL CALLS
CALL FORWARD -
BUSY
CALL FORWARD -
DON’T ANSWER
CALL FROM
STATION
ATND BUSY NANS
CALL FROM
TRUNK
Depends on trunk class BUSY NANS