Filter
Top Products
SA-1100 Developer’s Manual 11-3
Peripheral Control Module
Table 11-2 shows the base address for each of the peripheral control units.
1
The PPC does not support DMA requests.
Table 11-2. Peripheral Units’ Base Addresses
Peripheral Serial Protocol Base Address
LCD Controller 0h B010 0000
Serial Port 0 USB 0h 8000 0000
Serial Port 1
UART 0h 8001 0000
SDLC 0h 8002 0000
Serial Port 2
(ICP)
UART 0h 8003 0000
HSSP 0h 8004 0000
Serial Port 3 UART 0h 8005 0000
Serial Port 4
MPC 0h 8006 0000
SSP 0h 8007 0000
Peripheral Pin Controller (PPC)
1
0h 9006 0000