Filter
Top Products
11-44 SA-1100
Developer’s Manual
Peripheral Control Module
11.7.9 DMA Channel 1 Current Address Register
DMA channel 1 current address register (DCAR1) is a 32-bit read-only register that is used by
DMA channel 1 to keep track of the address of the DMA transfer currently in progress or the
address of the next DMA transfer. Any time the LCD is first enabled
(LEN= 0 → 1) or the value in
the current address pointer register equals the calculated end address value, the contents of the base
address pointer register is transferred to the current address pointer. This register can be read to
determine the approximate line that the LCD controller is currently processing and driving out to
the display. It is also useful to read this register just before writing the DMA’s base address pointer
to ensure that the end of frame is not about to occur, which means that the base address pointer is
about to be transferred to the current address pointer. Note that DCAR1 is a read-only register that
is not reset and is not initialized until the LCD is first enabled, causing the contents of the base
address register to be transferred to it; question marks indicate that the values are unknown at reset.
.
Address: 0h B010 0014 DCAR1: DMA Channel 1 Current Address Register Read-Only
Bit 31302928272625242322212019181716
DMA Channel 1 Current Address Pointer
Reset????????????????
--
Bit1514131211109876543210
DMA Channel 1 Current Address Pointer
Reset????????????????
Bit Name Description
31..0 DCAR1
DMA channel 1 current address pointer.
Read-only register. Continuously reflects the current address that DMA channel 1 is
transferring from or will use in the next transfer. Base address register is transferred to
this register whenever the LCD is enabled (LEN= 0 → 1) and when the current address is
equal to the calculated end address of the buffer.