Filter
Top Products
LAN Configuration
102
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 56.
2. Enter the settings as explained in the following table:
3. Click Apply to
save your changes and add the new IPv6 address pool to the List of IPv6
Address Pools table on the LAN Setup screen for IPv6.
To edit an IPv6 LAN address pool:
1. On
the LAN Setup screen for IPv6 (see Figure 55 on page 99), click the Edit button in
the Action column for the address pool that you want t
o modify. The LAN IPv6 Config
screen displays.
2. Modif
y the settings as explained in the previous table.
3. Click Apply to save
your settings.
To delete one or more IPv6 LAN address pools:
1. On
the LAN Setup screen for IPv6 (see Figure 55 on page 99), select the check box to
the left of each address pool that you want to delete, or click the Select
All table button
to select all address pools.
2. Click the Delete t
able button.
Table 18. LAN IPv6 Config screen settings
Setting Description
Start IPv6 Address Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between this address and the end IP address.
End IPv6 Address Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between the start IP address and this IP address.
Prefix Length Enter the IPv6 prefix length, for example, 10 or 64.